MULTILAYER FREQUENCY RESONANT HELMET Advanced experimental project — development in progress
We’ve made a significant leap forward in design. This new version integrates a complete resonant circuit where each component fulfills a specific function within a system that works in simultaneous layers of frequency, sacred geometry, and quantum water coherence.
SIGNAL INPUT
SIGNAL INPUTCable → MWO receiving antenna (Loop No. 3) The signal doesn’t come from just any point on the MWO—it’s specifically received from loop number 3 , which emits a particular frequency spectrum, ideal for this circuit. That signal goes directly to the heart of the system:
CENTRAL CORE — Plasma Disc
CENTRAL CORE — Plasma DiscThe Plasma disc acts as a nonlinear conductor, optimized for photons and high frequencies. It is not a conventional conductor— it does not follow the rules of classical electronics. It is positioned at the exact center of the resonant circuit, like the heart that receives and redistributes everything that enters from above and below.
UPPER DOME — That which feeds from above
UPPER DOME — That which feeds from aboveClear Quartz Pyramid (point UP — 6×6 cm) With a 9mm sapphire inserted in its center through a precise hole.
The pyramid acts as a collector and amplifier of etheric and cosmic energy. The sapphire, known for its corundum crystalline structure with a high capacity for energy absorption, captures this subtle energy and channels it downwards , directly to the Plasma disc.
The upward-pointing tip is not accidental — it is the classic receptive orientation of pyramidal geometry.
DOUBLE SPIRAL — The wave modulator
Positioned below the Plasma disk , the double spiral performs several critical functions:
- Force the frequency to decrease from the upper end to the lower end
- It improves and shapes the waveform before it reaches the tissues.
- It generates a toroidal effect that maintains the coherence of the field.
At the exact center of the spiral is a 3mm Ruby sphere — the ruby, due to its crystalline structure and its relationship with the wavelength of red (natural laser coherence), acts as a focal point of concentrated energy.
BOTTOM BASE — What anchors from below
BOTTOM BASE — What anchors from belowQuartz Pyramid (point DOWN — 6×6 cm) With a 6mm sapphire in its center.
The inversion of the pyramid is intentional— pointing downwards is the orientation for emitting and transmitting energy into the user’s field. The larger sapphire here acts as an output amplifier , projecting the processed field directly onto the scalp and cranial bioelectromagnetic field.
SIDES — Polished Yellow Quartz
SIDES — Polished Yellow Quartz12 faces — dodecahedral geometry. Located on both sides of the head. Yellow quartz works in the frequency band related to mental clarity and neuronal coherence. The 12 faces are not decorative — each facet creates a different angle of internal reflection and refraction, multiplying the emission vectors of the resonant field into the helmet.
THE REVOLUTIONARY ELEMENT — Living Water in Circulation
THE REVOLUTIONARY ELEMENT — Living Water in Circulation(Blue area of the design)
The inside of the helmet is completely filled with special water — either GANS Water or -mV Water (structured, superconducting, with negative oxidation-reduction potential).
This is not a minor detail. It is perhaps the most important component of the system:
- The water is in direct contact with all the resonant elements — pyramids, spirals, quartz crystals, plasma disc
- A small portable mechanical pump at the base of the hull keeps the water in continuous circulation , flowing in and out, so that it does not become stagnant.
- Moving water amplifies and carries frequency information throughout the circuit, acting as a medium of coherence — just as the pioneers of this technology described.
Static water = static field. Moving water = live field.
SEALING SYSTEM
SEALING SYSTEMTo keep the water inside without getting the researcher wet:
- Plastic adapted to the helmet with a leak-resistant sealing system
- The Plasma disc connection cable incorporates a watertight outlet system — the cable passes out without allowing any water to escape.
- Modular design for maintenance and water refilling
OVERVIEW
OVERVIEWZAFIRO 9mm (captación etérica)
↓
PIRÁMIDE CUARZO ↑ (amplificación cósmica)
↓
DISCO DE PLASMA (núcleo conductor no lineal) ← SEÑAL MWO ARO 3
↓
ESPIRAL DOBLE + RUBÍ 3mm (modulación de onda)
↓
PIRÁMIDE CUARZO ↓ + ZAFIRO 6mm (emisión al campo craneal)
🟡 CUARZOS AMARILLOS 12 caras (coherencia lateral)
💧 AGUA GANS/-mV en circulación (medio resonante vivo)
⚫ SHUNGIT + CUARZO + ZAPWIRE (protección y filtrado)
The entire system works as a single frequency organism — not as separate pieces.
The signal enters, is captured and amplified from above, modulated in the center, refined in the spiral, emitted downwards, and all of this bathed in a constantly moving superconducting aqueous medium.
This project is in the experimental prototype phase. All information is shared for collaborative research and development purposes.
Questions or suggestions for improving the design? 
mwo #ResonantHelmet #QuantumFrequencies #GANSWater #SacredGeometry #Biophysics
Basically, it works like this:
The frequencies from the MWO receiving antenna of ring #3 enter the plasma disk, an optimal nonlinear conductor for photons and high frequencies.
This plasma disc is located in the center of the resonant circuit.
On the disc is a 6x6 cm transparent quartz pyramid, facing upwards, with a hole in the center for a 9 mm sapphire that absorbs cosmic or etheric energy to send it also to the plasma disc.
Beneath the disc is the double spiral, which serves several functions, such as directing frequencies from the upper to the lower end, improving the waveform, etc. A 3 mm ruby sphere is placed in the center of this spiral.
Below the double spiral is another 6×6 cm pyramid, facing downwards, with a hole for a 6 mm sapphire.
Polished yellow quartz crystals with 12 faces are placed on the sides.
The blue part reflects the water, which should be Gans water. Alternatively, a special structured superconducting water (-mV) fills the entire casing, and at the bottom, a small portable mechanical pump keeps the water flowing in and out of the shell to prevent stagnation. This water is in contact with all the components of the resonant system, fulfilling the purpose of harmonization and more, as described by the pioneers.
To keep the water inside the helmet without wetting the researcher, we used a plastic that fits snugly around the helmet and a special leak-proof sealing system. Similarly, the cable that connects to the plasma disc has a system that allows the cable to extend without water seeping in.
